Mini Cooper F66 KW Suspension – Street Performance Coilover V1 Inox
£1,309.00
Mini Cooper F66 KW Suspension – Street Performance Coilover V1 Inox
KW Suspension Street Performance Coilovers V1 Inox For The Mini Cooper S (F66). High Quality German Coilovers. Sporty & Comfortable Dampening
The KW V1 coilover kit is the entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.
With the KW V1 coilover you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 35 to 55mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a separate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.
The KW V1 coilover satisfies the sporty driver with its harmonic basic setup. The KW engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don’t buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW V1 coilovers rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.
The KW V1 coilover kit has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.
Top Features
- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology “inox-line”
- Individually height adjustable
- Tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling
YouTube Video
This will be on our channel very soon
Specifications
- Damping Adjustment: No
- Product Line: Street Performance
- Lowering FA/RA: 35-55mm / 35-55mm
- Adjustment FA/RA: Thread / Thread
- Material: Stainless Steel
- Axle Load FA/RA: -1050kg / -915kg
Installation
We’re able to offer installation of this system to your vehicle at our workshop here in Poole, Dorset.
Typically installation for a system like this should take approximately 4-6 hours to complete. As part of the installation a 4-wheel alignment must be carried out once the suspension has been completed.
Please get in touch for more info on the installation aspect and pricing.
Compatibility:
- Mini Cooper S (F66) – 2024+
At this time, this coilover kit is not available for the JCW models.
If you are unsure of fitment, please get in touch with us before purchasing. If you would like an up to date stock level check, please do get in touch.
Mini Cooper 4th Gen Forum
If you own a Mini Cooper 4th Gen (F65 / F66 / F67) then check out our F6X Specific Facebook Page & Forum:
https://www.facebook.com/groups/minicooper4thgen/
Please Note:
- Possible drop measurement is based on a brand new vehicle from factory. The amount the car will lower by may vary depending on the age / mileage of your vehicle.
- Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
- For rear axle camber adjustment we recommend the installation of the car specific adjustable control arm set from KW. The part number for the control arm set is mention in the accessories list
Additional information
Weight | 22 kg |
---|