Audi R8 4S KW Suspension – Height Adjustable Spring Kit

KW Suspension Height Adjustable Lowering Springs For The Audi R8 4S. High Quality Springs With An Expected Drop Between 5mm – 35mm

The KW height adjustable spring kit is used for lowering of the vehicle in combination with the standard dampers. Unlike to conventional spring kits, a customized height adjustment is possible within the tested adjustment range. For this solution, vehicle-specific spring seats with adapted KW lowering springs and matching elastomers as well as dust protection systems are used. The standard damper system for example with electronic or hydraulic control, continues to remain active.

The used high-quality springs made of chrome-silicon steel for the KW height adjustable spring kits are adapted in their spring rate vehicle-specifically to the respective standard suspension damper and wheel loads. When developing the respective spring sets, we also take into account that the spring rates harmonize perfectly with the various damper characteristics of your adaptive standard suspension. So even with a KW HAS you can experience your car more directly and dynamically. The KW springs are suitable for drivers who want to decently lower their car while taking advantage of an individual adjustment range.

Similar to a coilover suspension, also the height-adjustable KW springs allow a continuous lowering within a decent range. This is not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery are always adjusted to the maximum possible lowering. So with the height-adjustable KW springs, a sporty and harmonious driving behavior can be realized without the driving dynamics of performance-oriented vehicles is suffering.

We are currently running this exact setup on our own Audi R8 Facelift model as you can see in the pictures.

YouTube Video

This will be on our channel very soon

Specifications

• Lowering FA/RA: 5-25mm/15-35mm
• Axle Load FA/RA: -970kg/-1195kg

Installation

We’re able to offer installation of this system to your vehicle at our workshop here in Poole, Dorset.

Typically installation for a system like this should take approximately 4-6 hours to complete. As part of the installation a 4-wheel alignment must be carried out once the suspension has been completed.

Please get in touch for more info on the installation aspect and pricing.

Compatibility:

• Audi R8 (4S) Pre-Facelift Models – 2016 – 2019
• Audi R8 (4S) Facelift Models – 2020+

If you are unsure of fitment, please get in touch with us before purchasing. If you would like an up to date stock level check, please do get in touch.

Please Note:

• Not for cars with electronic damping
• Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)