Porsche 911 992.1 KW Suspension – Height Adjustable Lowering Springs

KW Suspension Height Adjustable Lowering Suspension For The Porsche 911 (992.1). High Quality Springs With An Expected Drop Between 15mm – 35mm.

The KW height adjustable spring kit is used for lowering of the vehicle in combination with the standard dampers. Unlike to conventional spring kits, a customized height adjustment is possible within the tested adjustment range. For this solution, vehicle-specific spring seats with adapted KW lowering springs and matching elastomers as well as dust protection systems are used. The standard damper system for example with electronic or hydraulic control, continues to remain active.

The used high-quality springs made of chrome-silicon steel for the KW height adjustable spring kits are adapted in their spring rate vehicle-specifically to the respective standard suspension damper and wheel loads. When developing the respective spring sets, we also take into account that the spring rates harmonize perfectly with the various damper characteristics of your adaptive standard suspension. So even with a KW HAS you can experience your car more directly and dynamically. The KW springs are suitable for drivers who want to decently lower their car while taking advantage of an individual adjustment range.

Similar to a coilover suspension, also the height-adjustable KW springs allow a continuous lowering within a decent range. This is not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery are always adjusted to the maximum possible lowering. So with the height-adjustable KW springs, a sporty and harmonious driving behavior can be realized without the driving dynamics of performance-oriented vehicles is suffering.

Top Features

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Specifications

• Lowering FA / RA: 20-35mm / 15-35mm
• Axle Load FA / RA: -875kg / -1310kg

YouTube Video

This will be on our channel very soon

Installation

We’re able to offer installation of this system to your vehicle at our workshop here in Poole, Dorset.

Typically installation for a system like this should take approximately 4-6 hours to complete. As part of the installation a 4-wheel alignment must be carried out once the suspension has been completed.

Please get in touch for more info on the installation aspect and pricing.

Compatibility:

• Porsche 911 (992) Carrera (2018+)
• Porsche 911 (992) Carrera 4 (2018+)
• Porsche 911 (992) Carrera 4 GTS (2018+)
• Porsche 911 (992) Carrera 4 S (2018+)
• Porsche 911 (992) Carrera GTS (2018+)
• Porsche 911 (992) Carrera S (2018+)
• Porsche 911 (992) Carrera T (2018+)
• Porsche 911 (992) Dakar (2018+)
• Porsche 911 (992) Targa 4 (2020+)
• Porsche 911 (992) Targa 4S (2020+)
• Porsche 911 (992) Targa GTS (2020+)
• Porsche 911 (992) Targa GTS 4 (2020+)

Also includes the convertible / cabriolet variants of the above.

Suitable for vehicles both with and without PASM and/or Nose-Lift System.

If you are unsure of fitment, please get in touch with us before purchasing. If you would like an up to date stock level check, please do get in touch.

Please Note:

• Possible drop measurement is based on a brand new vehicle from factory. The amount the car will lower by may vary depending on the age / mileage of your vehicle.
• Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)