Cargraphic Porsche Exhaust Flap Valve Control Module | 2 Mode

Cargraphic 2-Mode Exhaust Valve Controller For Porsche 992 Carrera S, GTS and Turbo models. Plug-and-Play Module Suitable For Factory & Aftermarket Exhausts

The Cargraphic Exhaust Flap Valve Control Module (2-Mode) gives drivers direct control over the exhaust valve system fitted to modern Porsche sports exhaust systems. Designed specifically for selected models within the Porsche 911 range, this plug-and-play module allows the driver to override the factory valve logic and choose how the exhaust behaves.

From the factory, Porsche controls the exhaust valves through ECU programming, opening and closing them based on speed, load, and drive mode. While effective for emissions and noise regulations, this can prevent the exhaust system from delivering its full character at lower speeds or during normal driving.

The Cargraphic controller restores control to the driver by providing two selectable operating modes. The system can retain the factory automatic valve behaviour, or the valves can be kept permanently open to deliver the full sound of the Porsche Sports Exhaust whenever the car is running.

Installation is completely plug-and-play, connecting inline with the existing valve control wiring using OEM-style connectors. No cutting, coding, or permanent modifications are required, making it a reversible upgrade that integrates seamlessly with the vehicle’s electronics.

Designed for Porsche 992 models equipped with the Porsche Sports Exhaust (PSE), the module allows the driver to override the factory valve logic and unlock the full sound of the exhaust system

Suitable for both the factory exhaust and aftermarket systems such as Akrapovič and others.

YouTube Video

This video will be on our YouTube channel soon

Features:

• 2 selectable modes:
  • Sport – valves permanently open for maximum sound
  • Automatic – retains factory valve logic
• Fully plug-and-play installation with OEM connectors – no cutting or coding
• Programmable start mode – choose how your exhaust behaves on startup
• Works perfectly with OEM and aftermarket exhaust systems (e.g. Akrapovič, Cargraphic, etc.)
• Designed specifically for Porsche dual-valve systems
• Includes remote control for easy switching between modes
• No fault codes or warning lights
• Can be removed without a trace — safe for vehicle warranty

Installation

We can supply & fit this system at our workshop here in Poole, Dorset. It will take approximately 3 hours to complete depending on the vehicle.

This is a direct plug-and-play installation with no coding or software changes required.
However, due to the need for correct cable routing and secure mounting in high-temperature areas, professional installation is strongly recommended.

The controller can be easily removed at any time, reverting the vehicle to complete OEM operation — ideal for leased or warranty-sensitive vehicles.

Compatibility:

• Porsche 992.1 Carrera / Carrera 4 / Carrera S / Carrera 4S (3.0l)
• Porsche 992.1 Targa 4 / Targa 4S / Targa 4 GTS (3.0l)
• Porsche 992.1 GTS / GTS 4 (3.0l)
• Porsche 992. 1 Turbo / Turbo S (3.8l)

If you are unsure of fitment, please get in touch with us before purchasing. If you would like an up to date stock level check, please do get in touch.

If you have a GT3 / GT3 RS / Speedster / Cayenne or Panamera then you will need the 3-mode option which is on the link below or in the related products at the bottom of this page:

Cargraphic Porsche Exhaust Flap Valve Control Module | 3 Mode

Please Note:

• For safety reasons, your vehicle’s valves cannot be permanently closed using the Cargraphic controller as air restriction under full throttle may cause damage over time.
• This module system works with both the factory and aftermarket exhaust systems. If your vehicle has an aftermarket system (It must retain the use of the factory electronic valving). If you’re unsure if your system is compatible, please get in touch.