Audi RS5 (B10) Gloss Twill Carbon Fibre Arch Guards

Audi RS5 (B10) Gloss Twill Carbon Fibre Arch Guards

Buy this product and get
138 Points in points system
Buy this product to earn 138 Points 

£69.95

In house installation is now available! To get a quote please contact us
Optional Extras
Compare
SKU: 00723 Categories: ,

Share this product

Audi RS5 (B10) Gloss Twill Carbon Fibre Arch Guards

The Carbonwurks Audi RS5 B10 Gloss Twill Carbon Fibre Front Arch Guards. Protect The Sides Of Your Vehicle. Genuine Gloss Carbon Fibre in 2×2 Twill.

Whilst the new Audi RS5 B10 platform is truly stunning there’s a few areas where we thought we could improve on it. One of these is helping to protect the side of your vehicle and the side skirts. This is a well known problem with various makes and models and helps prevent stones and debris being flicked up off the ground from the tyre.

These front arch guards are made from 100% pure gloss carbon fibre. The carbon is a 2×2 twill (Autoclave) which is the most popular type of carbon used at the moment. These are incredibly light, super strong and more than anything they look fantastic! The finish is a raw gloss carbon, these are not lacquered but make use of a UV stable resin giving a super smooth and hard wearing finish that won’t chip like a lacquered finish.

If you don’t fancy the twill carbon look then we have also created these guards in Audi “Camouflaged” forged variant which you can find here – https://carbonwurks.com/product/audi-rs5-b10-forged-camouflaged-carbon-fibre-arch-guards/

As part of creating this arch guard we fully 3D scanned the wheel and arch area of our resident Audi RS5 Avant (B10) with several 3D printed prototypes made to ensure we got just the right fit and look. This product was fully researched, designed and manufactured in house which is a commitment to our “Made In Britain” approval!

YouTube Video

This video will be on our YouTube Channel very soon

Contents:

  • 2 x Arch Guards in Gloss Twill Carbon Fibre (Set for front aches – Left & Right)
  • 4 x Plastic Pop Rivets
  • 2 x Alcohol wipes

Installation

  • Fitment is incredibly easy (install guide supplied) and can be done in less than 5 minutes per side. You simply remove the existing plastic trim rivets in to your arch liner, clean and prep the area and then using our own OEM style pop-rivets to secure to the inner arch and also supplied is a pre-installed high bond double sided tape to prevent any rubbing and to give a very secure fit. The guards however are still completely removable.
  • It’s very important that as part of the installation the arch area is properly cleaned and free from any grit, dirt or grease. We also recommend that the tape and the arch area is heated gently to allow the tape to adhere sufficiently. Failure to do this correctly will result in the tape not bonding with the arch correctly.

Compatibility:

Suitable for only the following models:

  • Audi RS5 B10 Saloon – 2026 onwards
  • Audi RS5 B10 Avant – 2026 onwards

Currently we have only tested on the above models so cannot confirm if it works on any other models within the Audi range (Including the S5 and standard A5 models).

If you are unsure of fitment, please get in touch with us before purchasing. If you would like an up to date stock level check, please do get in touch.

Audi RS5 B10 Saloon & Avant Forum

If you own an Audi RS5 B10 then check out our Specific Facebook Page & Forum:

Forum – https://www.facebook.com/groups/audirs5b10

Please Note:

  • These arch guards are only suitable for the front of your vehicle

Additional information

Weight 0.120 kg
YOUR CART
2

Select at least 2 products
to compare