Audi R8 V10 Carbonwurks Performance Titanium Exhaust System
£4,495.00
Audi R8 V10 Carbonwurks Performance Titanium Exhaust System
The Carbonwurks Performance Exhaust System For The Audi R8 V10 (2016 – 2019). Full Titanium & Ultra-Lightweight. OEM Valve Control. Enhanced Deep Raw Sound, Unrivaled Performance & Sound.
Carbonwurks have been supplying and offering exhaust systems from countless manufacturers for over a decade. Having seen first-hand the short comings of others ranging from poor fitment, lack of performance & sound, we took the decision to develop our own systems. The whole ethos of CW Performance is to offer some of the finest quality and fitting products and to give a refined, improved exhaust note that is in keeping with the identity of the car.
The CW Performance Titanium exhaust for the Gen 2 (4S) Audi R8 takes a radical design profile to extract near race car exhaust notes with the valves open and yet with the valves closed, a refined, non droning note. Using Titanium for this system we have managed to create an exhaust that weighs in a sniff over 11KG (with all clamps and brackets included) compared to the OEM factory system which weights in at a colossal 34kg! This is close to a 23KG saving!
To further enhance the look and longevity of the CW Performance exhaust, we have opted for a sand blasted finishing giving a nice satin sheen to the metalwork. Over time with heat, the titanium will turn a beautiful rainbow gold & blue colour.
It’s recommended that at the time of installation you replace the Exhaust V-Bland Clamps as it’s likely that your current ones will be difficult to remove or rusted through. These are available direct from us at time of purchase of the exhaust.
Key Features
- Full Titanium Exhaust
- Shot Blasted Surface
- Performance Increase
- Light Weight Construction (Over 23kg saved)
- Perfect Shape & Fitment
Lead Times
Typically we try to hold these systems in stock but due to how popular they are there maybe times where they will be on back-order.
- All CW Performance products are produced in batches. We aim to carry stock of all products however in the event that parts are not available then please allow approximately 4 – 6 weeks from the point of order before your parts ship.
- For lead time estimates prior to ordering please contact us via the contact page.
Our Audi R8 Dedicated Forum – https://www.facebook.com/groups/audir8enthusiastÂ
YouTube Video
Carbonwurks Performance Exhaust System Installed on to a 2018 Audi R8 V10 Plus
Contents:
- 1 x CW Performance Exhaust System – R8 Gen 2 (Pre-facelift)
- 2 x High Performance Valve Pipework
- 2x Pipework Heat Shielding
Fits:
- Audi R8 Gen 2 Coupe & Spyder 2016-2019 (pre facelift only)
Notes:
- Due to this being a Titanium product it will naturally change colour over time and heat cycles.
- Care should be taken during installation to ensure fingerprints are not left on the pipework
Additional information
Weight | 35 kg |
---|